제품 상세정보
원래 장소: 중국
브랜드 이름: zheheng steel
인증: iso9001
모델 번호: 88.9 밀리미터
지불과 운송 용어
최소 주문 수량: 협상 가능
가격: Negotiable
포장 세부 사항: 내수성 재료 또는 나무 상자 포장과 번들에서
배달 시간: 30 일
지불 조건: L/C (신용장), 전신환, 인수 인도, D/P (지급도 조건)
공급 능력: 50TONS/30DAYS
소재: |
tp309H |
표준: |
ASTM, GB, JIS, DIN, 엔, AISI |
소재 유형: |
S30909 |
기술: |
콜드드론 |
적용: |
파이로케미칼 공정 |
패키지: |
우븐 포장 |
OD: |
6-830mm |
소재: |
tp309H |
표준: |
ASTM, GB, JIS, DIN, 엔, AISI |
소재 유형: |
S30909 |
기술: |
콜드드론 |
적용: |
파이로케미칼 공정 |
패키지: |
우븐 포장 |
OD: |
6-830mm |
Stainless Steel Pipe Tube A312/ A312M TP309H S30909 Used in furnace material
Introduction to products:
The corresponding Chinese brand of 309S is 0Cr23Ni13, and the American standard S30908 (American AISI, ASTM) characteristics and uses: corrosion resistance and heat resistance are better than 0Cr19Ni9.
The 309s is a variant of the lower carbon 309 stainless steel for use where welding is required. The lower carbon content minimizes the carbides precipitated in the heat-affected zone near the weld, which can lead to intergranular corrosion (welding erosion) in stainless steel in some environments.
APPLICATIONS :
Use: furnace material.
Widely used in boilers, energy (nuclear power, thermal power, fuel cell), industrial furnaces, incinerators, heating furnaces, chemical, petrochemical and other important fields.
Chemical Composition of 309S(S30908)
| C | Si | Mn | Ni | P | S | Cr | Mo | |
| Min | 9 | 22 | ||||||
| Max | 0.08 | 1 | 2 | 12 | 0.045 | 0.030 | 24 | 0.75 |
Description for our production range:
Name :Stainless Steel seamless Pipe
Standard :
A213
Material Grade :
S34709
Diameter :OD: 6-830mm
W.T: 0.6mm - 60mm
Length :Up to 13 meter or as customers' request
Tolerance :According to the Standard.
Surface :
Natural Color of annealing & pickling, 180G, 320G, 400G Satin / Hairline
400G, 500G, 600G or 800G Mirror finish
Test :
UT, ET, HT, RT,ect, and others according to the standard,
or as the requests of the customer
our products packing:
Tensile Requirements – Stainless Steel 310S/310H:
Tensile Strength (KSI): 75
Yield Strength (KSI): 30
Notes:
10-6·K-1 = 10-6/K
1 Ω·mm²/m = 1 μΩ·m
1 g/cm3 = 1 kg/dm3 = 1000 kg/m3
1 GPa = 1 kN/mm2
1 MPa = 1 N/mm2
other supplement:
1.A999/A999M: Each pipe shall be subjected to the nondestructive electric test or the hydrostatic test, the pipe of test to be used shall be at the option of the mfg, unless otherwise specified in the PO.
2. The Pipe lengths : Unless otherwise agreed upon, all size from NPS 1/8" TO AND INCLUDING nps 8 are available in a length up to 24ft with the permitted range of 15 to 24 ft. Short length are acceptable and the number and min, length shall be agreed upon between mfg and purchaser.
3. The finished pipe shall be reasonably straight and shall have workmanlike finish, Removal of imperfections by grinding is permitted, provided the W.T are not decreased to the less than the permitted in Section 9 of Specification A999/A999M
4. Butt Weld End: According to ANSI B 16.25
5. Pipe Marking: Specified in A999/999M, include "Logo+Standard+SIZE+Heat No.+Lot No.+H.T/E.T/U.T"
6. Packing: Each Pipe end is protected by Plastic cap. Then packed by Anti-rust steel strip, The outside of the bundle is plastic woven bag, or Plastic film.
7. Packing Mark: SIZE + STEEL GRADE+ QTY OF PIECE/WEIGHT/METRE.
8.MTC: BWSS Official Original MTC paper will be supplied for each order.
비디오
비디오
